The Career Improve is an independent job search aggregator. We may earn a commission when you click through.
Manufacturing Jobs Ranked: Pay, Location and Career Path
Compare 10 production roles by location, shift potential and entry requirements, including a Skiatook role with a stated NZ$34 hourly floor.
Quick Picks
Best overall: Production Worker - Entry Level.
Best budget: Light Industrial Worker — Skiatook, OK.
Best for machine experience: Production Team Member / Machine Operator.
Manufacturing is not one job category. The list ranges from entry-level production work to machine operation and casual process roles, with locations spanning New Zealand and the United States. The biggest verified pay signal is the Skiatook listing: Ted’s Temps states a NZ$34 hourly minimum after conversion from the published US$20 rate. The other listings do not provide enough pay or benefit detail to rank them on salary alone.
Entry-Level Production Roles
Is manufacturing experience required to get started? The first and sixth listings are the clearest entry points because their titles focus on production work and factory association rather than specialist engineering. Still, applicants should confirm training, shift patterns, physical requirements and employment status before applying. Those details are not included in the supplied listings.
1. Production Worker - Entry Level
This is the safest starting point in the ranking because the title explicitly says entry level. That matters for career changers, school leavers and applicants moving from retail, hospitality or logistics into production. The listing does not provide a wage, location, shift pattern or benefits, so the role cannot be called the highest-paying option. It can, however, be judged on accessibility.
Ask the hiring contact three practical questions: Is training paid, what does the first shift involve, and is the position permanent or temporary? Those answers will tell you more than the broad title. A production worker role commonly builds transferable habits around safety, quality checks, output targets and teamwork, but applicants should not assume those duties without confirmation from the employer.
Compared with the Skiatook role below, this position has weaker verified pay information but a clearer entry-level signal. I would put it first for someone who needs a low-barrier route into manufacturing and is willing to trade salary certainty for a potentially broader location range.
- ✅ Explicitly labelled entry level
- ✅ Suitable starting point for career changers
- ❌ No pay, location or shift details supplied
- ❌ Training and employment status need confirmation
Production Worker
The explicit entry-level label makes this the most accessible starting point, but the missing pay and location details mean applicants should confirm the practical terms before applying.
6. Factory Associate 1st Shift
The first-shift wording gives this listing a useful advantage over roles with no schedule information. A daytime shift can make childcare, public transport and study easier to organise, though the listing does not confirm exact hours or whether overtime is available. Focus Jobs describes factory work as a speciality and provides links for applying, logging in and accessing W-2 information, which suggests an established workforce-management process rather than a bare classified advert. That is useful context, but it is not proof of permanent employment or better benefits.
The title says “factory associate,” not machine operator. That distinction may suit someone who wants manufacturing exposure without presenting prior equipment experience. It also means applicants should ask how much of the role involves packing, inspection, material handling or production-line work. The supplied page content does not specify duties, pay or progression.
Compared with the entry-level production worker, this role offers a clearer schedule direction but less clarity about the entry requirement. I would rank it higher for a parent or student who needs daytime work and lower for anyone who needs a confirmed wage before spending time on an application.
- ✅ First-shift schedule is stated in the title
- ✅ Focus Jobs provides application and employee-resource links
- ❌ Wage and duties are not supplied
- ❌ Exact hours and progression remain unclear
For source verification, applicants can review the Focus Jobs factory listing directly. The page should be checked for current availability before applying.
Factory Associate
A stated first shift gives this factory associate role more schedule direction than the entry-level listing, although pay, exact hours and duties still need confirmation from Focus Jobs.
The opening pair suits applicants prioritising access or schedule clarity, not applicants comparing confirmed salaries. The next group is more operational: machine and process roles can build stronger technical experience, but they may demand more consistency, concentration and tolerance for repetitive work.
Machine and Process Work
Production titles often hide very different day-to-day demands. A machine operator may monitor equipment, respond to faults and record quality information; a process worker may spend more time handling materials, packing or following set production steps. None of the supplied New Zealand listings includes pay, so location and title are the useful comparison points.
7. Production Team Member / Machine Operator
This listing combines two useful signals: “team member” suggests a collaborative plant environment, while “machine operator” points to equipment-based work. That makes it more technically focused than a generic production worker title, even though the supplied data does not confirm required experience. Applicants with manufacturing, warehousing or mechanical exposure should ask whether training is provided or whether the employer expects previous machine operation.
The role is listed in Queenstown through a Talent.com redirect. That location may matter as much as the job title: Queenstown can bring higher accommodation and commuting pressure than smaller industrial centres. The listing does not provide a wage, roster, employer name or benefits, so applicants should not assume the location premium is reflected in pay.
Compared with the two entry-level listings, this role may offer a stronger route towards operator, setter or quality-control work, but that progression is an inference from the title rather than a promise in the listing. I would choose it over a generic production role if you want equipment experience and can verify training, roster and transport arrangements first.
- ✅ Machine operation is named directly
- ✅ Combines technical duties with team-based work
- ❌ No employer, pay or training information supplied
- ❌ Queenstown living and commuting costs need checking
Production Team Member
The combined team-member and machine-operator title points to more technical exposure than a generic factory role, but Queenstown applicants should verify pay, transport and training before committing.
9. Machine Operator / Production Team Member
The Nelson version is closely related to the Queenstown listing, which makes the comparison unusually useful. Both titles combine machine operation with production-team work, but the Nelson listing is attached to a different Talent.com search and does not show a wage or named employer in the supplied data. Applicants should treat them as separate vacancies, not duplicate adverts.
Nelson may suit someone who wants a production role outside the larger centres, but the title alone cannot establish better work-life balance, pay or advancement. The machine-operator wording still gives this role a technical edge over the factory process positions below. Ask about the equipment involved, shift rotation, noise exposure, lifting limits and the pathway to higher-responsibility operator work.
I would compare this directly with the Queenstown role before applying to both. If the duties are identical, choose based on confirmed hourly pay, roster stability and commuting costs rather than the location name. If Nelson provides structured training and Queenstown does not, that detail matters more than the title.
- ✅ Technical machine-operation pathway is signalled
- ✅ Nelson location may suit applicants avoiding larger centres
- ❌ No pay, employer or shift information supplied
- ❌ Similar title creates uncertainty about how the role differs from the Queenstown listing
Machine Operator
Nelson’s machine-operator title mirrors the Queenstown role, so the deciding evidence should be roster, wage and training rather than the job title or location alone.
10. Machine Operator
The Dunedin listing strips the title back to its core function. That can be useful for experienced applicants who already know they want equipment-based production work, but it gives beginners less information about the team, product or training environment. The supplied listing does not state the machine type, required certification, pay, roster or employer.
Dunedin has a substantial student and manufacturing workforce, so applicants may find several competing roles nearby; that is a market observation, not a feature confirmed by this listing. The practical screening questions remain the same: Is the work day shift or rotating, does the employer train new operators, and are quality records or maintenance checks part of the job?
Compared with the two combined machine-operator roles, this vacancy may appeal to someone who wants a cleaner technical identity on their CV. It is less useful for a first-time applicant who needs a clear picture of the work. I would apply after confirming the equipment and shift pattern, particularly if you are comparing it with the Nelson or Queenstown listings.
- ✅ Direct machine-operator focus
- ✅ Dunedin location gives local applicants another production route
- ❌ No machine type, pay or training details supplied
- ❌ Less context than the combined team-member titles
Machine Operator
The stripped-back title may suit an experienced operator, but beginners need to confirm the equipment, certification expectations and roster before treating it as a career step.
5. Factory Process Worker (Casual)
“Casual” is the key word here. The Tauranga listing may suit applicants who need short-term flexibility, are testing manufacturing before committing, or want work around another responsibility. It may be less suitable for anyone relying on predictable weekly hours, guaranteed income or a clear promotion pathway. The supplied data does not provide pay, shift details, employer name or the length of the assignment.
Process work can build useful production habits, but applicants should ask whether casual status means variable shifts, on-call availability or a fixed temporary contract. Those arrangements are not interchangeable. Also confirm holiday pay, minimum shift lengths and the process for accepting or declining work, because the title alone does not answer those questions.
Compared with the machine-operator roles, this is a lower-commitment route into factory work and probably a weaker technical signal on a CV. Its value is flexibility, not confirmed earnings. I would rank it above the Rotorua process role for someone specifically seeking casual work, but below any listing that confirms stable hours or training.
- ✅ Casual status may suit variable availability
- ✅ Tauranga location gives local applicants a manufacturing route
- ❌ Hours and income may be unpredictable
- ❌ No pay, duties or progression details supplied
Factory Process Worker
The casual label is useful for applicants needing variable work, but it is a warning for anyone who needs guaranteed hours or a predictable weekly income.
The technical roles offer a clearer operator pathway, while the Tauranga position trades progression certainty for flexibility. The final cluster has the strongest verified pay information, but it is also the only listing based in the United States, so NZ applicants must treat the location and currency as a major practical barrier.
The Verified Pay Leader
Pay is the standout fact in this comparison. Ted’s Temps states a NZ$34 hourly floor for light industrial work in Skiatook, Oklahoma, compared with Oklahoma’s published US$7.25 statutory minimum. The wage claim appears on the Ted’s Temps Skiatook page; the NZD figure here is an approximate conversion for reader consistency, not a New Zealand wage offer.
2. Light Industrial Worker — Skiatook, OK
Ted’s Temps lists assembly-line operators, machine tenders, quality-check staff, kitters and production helpers under this light-industrial category. That breadth is valuable because it gives applicants several possible entry points rather than one narrow task. The page also states a NZ$34-equivalent hourly floor, which is the only explicit wage figure in the supplied data and makes this the pay leader by a wide margin.
The downside is just as clear: this is not a New Zealand vacancy. A New Zealand applicant would need the right to work in the United States, and the conversion does not account for tax, exchange-rate movement, relocation or healthcare costs. The role also appears to cover multiple job types, so applicants should ask which assignment is actually available and whether the stated floor applies to every placement.
Compared with the New Zealand listings, this is the strongest option on published pay and the weakest on local accessibility. I would recommend it only to a worker already eligible to work in the US, able to relocate or already living near Skiatook, and comfortable choosing between assembly, machine-tending and quality-check duties.
- ✅ Published wage floor equivalent to approximately NZ$34 per hour
- ✅ Multiple light-industrial pathways listed
- ❌ US-based, not a local New Zealand opportunity
- ❌ Relocation, work rights and exact assignment need confirmation
Light Industrial Worker
Ted’s Temps publishes the only clear wage floor in the list, approximately NZ$34 per hour after conversion, but the US location makes work rights and relocation the first questions to answer.
New Zealand Production Roles by Location
The remaining listings are useful as local search leads, but the supplied records contain very little detail beyond title and location. That limits any honest ranking: a Rotorua process role cannot be called better than a Wellington operator role without pay, roster or employer information. Applicants should use the titles to shortlist vacancies, then compare the missing terms directly on the live listing.
3. Production Operator — Queenstown
The Queenstown production-operator title is broader than the machine-operator listing, so it may cover equipment, line monitoring, quality checks or material movement. None of those duties is confirmed in the supplied data. The location is the main differentiator, and applicants should check accommodation and transport before applying because a seemingly attractive hourly rate can lose value if commuting or housing costs are high.
This role belongs near the machine-operator listings because “operator” can signal a path towards equipment responsibility. Ask about certification, training and whether the plant runs rotating shifts. I would shortlist it if you live in the Queenstown area or already have production experience, but I would not rank it above the machine-operator/team-member role without more detail.
- ✅ Production-operator title may support a technical career path
- ✅ Clear Queenstown location
- ❌ No wage, employer, roster or duties supplied
- ❌ Local accommodation and transport costs need checking
Production Operator
Queenstown gives this production-operator listing a clear location, but applicants need the roster, equipment details and wage before comparing it fairly with the nearby machine-operator role.
4. Production Operator — Wellington
The Wellington listing has the same broad title as the Queenstown role, which makes location the clearest comparison point. Wellington applicants may have more transport options and a larger pool of employers, but neither advantage is stated in the listing itself. Do not assume the role is urban, daytime or higher paid simply because it is in the capital.
The title suggests production responsibility rather than purely general labour, yet the supplied data does not identify the product, machinery or experience threshold. Ask whether the job includes quality documentation, line changeovers or maintenance escalation. Those details determine whether the position builds technical capability or remains repetitive line work.
Compared with Queenstown, Wellington may be easier for applicants already living locally, while Queenstown could suit someone seeking a regional move. The better career decision depends on confirmed pay, shift stability and progression, not the city label. I would shortlist both and apply first to the vacancy that names training and permanent hours.
- ✅ Clear Wellington location
- ✅ Operator title may provide production experience beyond basic labouring
- ❌ No employer, pay or shift information supplied
- ❌ Duties and progression are not explained
Production Operator
Wellington is the practical advantage here for local applicants, but the role should not be assumed to offer daytime hours or higher pay without confirmation.
8. Factory Process Worker — Rotorua
The Rotorua process-worker listing is the non-casual counterpart to the Tauranga role, at least by title. That may indicate a more regular arrangement, but the supplied record does not state permanent status, hours or pay, so applicants must verify rather than infer. The role may suit someone who wants factory experience without the machine-operator label, particularly if the employer provides on-the-job training.
Ask about physical demands, standing time, lifting limits, personal protective equipment and whether the work follows a fixed roster. Process work is often judged by accuracy and consistency, not just speed, so quality expectations matter. The listing gives no product or industry detail, which makes those questions essential.
Compared with the Tauranga casual vacancy, Rotorua appears less explicitly flexible but potentially more stable. Compared with the Dunedin machine-operator role, it gives a weaker technical signal. I would place it in the middle for someone living nearby who wants a first factory role and values local access over a clearly defined operator pathway.
- ✅ Rotorua location is clear
- ✅ Factory process title may suit entry-level applicants
- ❌ Employment status, pay and hours are not supplied
- ❌ Product, physical demands and training remain unknown
Factory Process Worker
Rotorua provides a local factory-process lead for beginners, but the missing hours and employment-status details make it less predictable than the title suggests.
5. Factory Process Worker (Casual) — Tauranga
The Tauranga casual listing belongs here as a location comparison as well as a flexibility pick. Casual status can be useful for applicants balancing study, caregiving or another job, but it can also mean fewer guaranteed shifts. Confirm the minimum commitment, notice period and whether casual workers can move into permanent positions.
Against the Rotorua process role, Tauranga is more transparent about flexibility but less reassuring for income stability. Against the machine-operator roles, it offers less evidence of technical progression. It still has value as a way into manufacturing, especially if a worker wants to test factory work before committing to a full-time roster.
The listing does not include pay or employer details, so it should not be treated as a confirmed high-paying opportunity. Applicants should compare the live advert with the source listing before applying and ask for the employment agreement terms in writing.
- ✅ Casual arrangement may suit variable availability
- ✅ Tauranga location is clearly identified
- ❌ Guaranteed hours and pay are not supplied
- ❌ Technical progression is less evident than in operator roles
Factory Process Worker
Tauranga is the better local lead for someone who needs casual work, but applicants who need stable income should favour a listing that confirms regular hours.
One data-quality warning matters here: several Talent.com links are redirects, and most records omit pay, employer and roster information. Use the Talent.com New Zealand jobs site to verify the live vacancy, then compare the employment agreement rather than relying on the title alone.
Comparison Table
| Rank | Role | Location | Pay shown | Best for |
|---|---|---|---|---|
| 1 | Production Worker - Entry Level | Not supplied | Not supplied | Career changers and first-time production applicants |
| 2 | Light Industrial Worker | Skiatook, OK | NZ$34/hr equivalent minimum | US-eligible workers prioritising published pay |
| 3 | Production Operator | Queenstown | Not supplied | Applicants seeking operator-level production work |
| 4 | Production Operator | Wellington | Not supplied | Wellington-based production applicants |
| 5 | Factory Process Worker (Casual) | Tauranga | Not supplied | People needing variable work |
| 6 | Factory Associate 1st Shift | Columbus, KS | Not supplied | Applicants seeking a stated first-shift direction |
| 7 | Production Team Member / Machine Operator | Queenstown | Not supplied | Applicants building machine experience |
| 8 | Factory Process Worker | Rotorua | Not supplied | Local entry-level factory applicants |
| 9 | Machine Operator / Production Team Member | Nelson | Not supplied | Applicants seeking a technical production pathway |
| 10 | Machine Operator | Dunedin | Not supplied | Experienced operators or technical career switchers |
Choose the Production Worker - Entry Level role if you are new to manufacturing and need the clearest access point. Choose the Light Industrial Worker — Skiatook, OK only if you already have US work rights and the published NZ$34-equivalent wage justifies relocation; for New Zealand applicants, compare the Queenstown, Wellington, Nelson, Dunedin, Rotorua and Tauranga listings after confirming pay, hours and training.
Before applying, read Debunking Manufacturing Job Myths: What You Need to Know to separate genuine career pathways from vague promises about factory work.